LK型可抽式立式長軸濕坑泵

概述

LK型可抽式立式長軸濕坑泵適用于電廠、鋼廠、自來水公司、汙水處理廠、石油化工、礦山等工礦企業亚洲中文字幕婷婷在线成AV免费大片黄在线观看国产网址在线观看，以及市政給排水工程、農業灌溉、防洪排澇等工程亚洲中文字幕婷婷在线国产网址在线观看国产精品久久久久久亚洲影视内衣。LK型可抽式立式長軸透平泵可以用來輸送55℃以下的清水、雨水、鐵皮坑水、汙水以及海水等介質A级毛片高清免费网站不卡一区二区三区国产亚洲网站国产网址在线观看，流量範圍30-70000m³/h亚洲va999成人A片在线观看A级毛片高清免费网站不卡亚州视频在线，揚程範圍7-200m四库影院永久国产精品成AV免费大片黄在线观看。特殊設計的LK型可抽式立式長軸透平泵輸送介質溫度可達90℃亚洲中文字幕婷婷在线国产网址在线观看。

Description

The said series pumps are used to transfer clear water,rain water,water in iron sheet pits,sewage and seawater,servicing in power plants,iron and steel works,water supply companies,sewage treatment plants,petroleum and chemical industries,mines as well as municipal water supply and drainage projects,farmlands irriagation,flood protection and drain waterlogged farmlands,etc..The temperature of pumped media is below 55⁰C and reaches to 90⁰C for special design. The flow rate ranges from 30 to 20000m³/h and the head—from 7 to 200m.

LK型可抽式立式長軸濕坑泵産品特點

1、 運行平穩国产网址在线观看国产精品久久久久久亚洲影视内衣，安全可靠成AV免费大片黄在线观看，免抽真空啓動一个人看的免费高清WWW视频四库影院永久国产精品A级毛片高清免费网站不卡，使用壽命周期長一区二区三区国产亚洲网站四库影院永久国产精品。

2、 泵體積小亚州视频在线，基礎占地面積少成AV免费大片黄在线观看一区二区三区国产亚洲网站一个人看的免费高清WWW视频，基礎以下泵長度可以調整一个人看的免费高清WWW视频国产网址在线观看，適應性強亚洲中文字幕婷婷在线亚州视频在线四库影院永久国产精品。

3、 流道簡單可靠一区二区三区国产亚洲网站国产网址在线观看成AV免费大片黄在线观看，節省泵房基建投資成AV免费大片黄在线观看亚州视频在线。

4、 結構合理一个人看的免费高清WWW视频，裝拆方便国产精品久久久久久亚洲影视内衣成AV免费大片黄在线观看四库影院永久国产精品，維護檢修容易簡便亚州视频在线。

5、 泵效率高四库影院永久国产精品国产网址在线观看一个人看的免费高清WWW视频，降低運行成本成AV免费大片黄在线观看。

Features

1. Operation smooth,safe and reliable,starting without exhausting vacumn,service life long.

2. The volumn of the pump small,less occupied land area, the length under foundation adjustable,applicability strong.

3. Flowing channel simple and reliable,saving the investment for construction of the pump house.

4. Structure reasonable,convenient for mounting and dismantling,,easy to maintain and inspect.

5. Efficiency high, operating cost reduced.

LK型可抽式立式長軸濕坑泵型號說明

1400LK-30Ⅰ                                 

1400—Outlet of the pump:1400mm              

L----Vertical mixed flow pump               

K----Pull-out rotor                         

30---Design head                            

Ⅰ---Pump design class(no mark when         

first time design)                         

Remarks: multistage type is usually         

Not designed for the pump of large

nozzle diameter.

産品結構說明

簡圖一. LK型立式長軸濕坑泵結構簡圖(型式ST)

簡圖二. LK型立式長軸濕坑泵結構簡圖(型式XD)

1、 LK型可抽式立式長軸濕坑泵为立式单级（多级）离心式或斜流式带导叶体结构A级毛片高清免费网站不卡国产精品久久久久久亚洲影视内衣。

2、 泵的結構型式有泵吐出口在安裝基礎之上和之下(型式代號分別爲S和X)、泵承受軸向力和電機承受軸向力(型式代號分別爲T和D)、外接潤滑水和泵自身潤滑等形式亚洲中文字幕婷婷在线国产网址在线观看。

3、 泵安裝型式有濕坑式安裝或幹坑式安裝国产精品久久久久久亚洲影视内衣亚洲va999成人A片在线观看。

濕坑式安裝：泵下部浸沒在吸水池中亚州视频在线亚洲va999成人A片在线观看。

幹坑式安裝：泵采用管道進水国产精品久久久久久亚洲影视内衣，泵吸入喇叭口與進水管道之間采用90°肘形進水彎管聯接亚洲va999成人A片在线观看四库影院永久国产精品国产精品久久久久久亚洲影视内衣。

4、 泵軸承爲橡膠導軸承或賽龍導軸承成AV免费大片黄在线观看。

5、 泵口径在1000mm以下时国产网址在线观看，泵转子一般为不可抽形式；泵轴向水推力及转子重量一般由泵本体推力轴承承受四库影院永久国产精品A级毛片高清免费网站不卡亚洲中文字幕婷婷在线，泵和电机之间采用弹性联接；泵吐出口位于安装面基础之上（型式代号为ST的结构形式）亚洲中文字幕婷婷在线一区二区三区国产亚洲网站。如有要求A级毛片高清免费网站不卡一个人看的免费高清WWW视频亚洲中文字幕婷婷在线，也可以由电机承受轴向水推力及转子重量；或其它结构形式的组合（型式代号为SD、XT、XD）;用户如有要求一区二区三区国产亚洲网站， 也可以设计成可抽式结构形式一区二区三区国产亚洲网站亚洲中文字幕婷婷在线国产精品久久久久久亚洲影视内衣。泵口径在1000mm以上时A级毛片高清免费网站不卡，泵转子一般为可抽形式；泵轴向水推力及转子重量一般由电机推力轴承承受国产精品久久久久久亚洲影视内衣A级毛片高清免费网站不卡，泵和电机之间采用刚性联接；泵吐出口位于安装面基础之下（型式代号为XD）一区二区三区国产亚洲网站。如有要求一个人看的免费高清WWW视频，也可以由泵承受轴向水推力及转子重量；或其它结构形式的组合（型式代号为XT、SD、ST）一区二区三区国产亚洲网站国产网址在线观看。用户如有要求四库影院永久国产精品亚州视频在线， 也可以设计成不可抽式结构形式亚洲中文字幕婷婷在线。

6、 泵本體承受軸向水推力及轉子重量時一区二区三区国产亚洲网站一个人看的免费高清WWW视频，泵推力軸承采用稀油潤滑亚洲va999成人A片在线观看亚洲中文字幕婷婷在线四库影院永久国产精品，推力軸承部件帶Pt100測溫元件測軸承溫度或壓力式溫度計測潤滑油溫度四库影院永久国产精品亚洲中文字幕婷婷在线成AV免费大片黄在线观看。

7、 泵軸向密封采用填料密封亚州视频在线一个人看的免费高清WWW视频。

8、 在泵安裝基礎上可以進行葉輪與葉輪室（轉動部分與靜止部分）之間間隙的調整成AV免费大片黄在线观看A级毛片高清免费网站不卡四库影院永久国产精品，操作方便亚洲va999成人A片在线观看亚州视频在线一区二区三区国产亚洲网站。

9、 從吐出方向往泵看A级毛片高清免费网站不卡，電機接線盒與泵外接潤滑水接管位于左側亚洲中文字幕婷婷在线亚州视频在线。也可根據用戶要求四库影院永久国产精品亚洲va999成人A片在线观看，布置在其它方位一区二区三区国产亚洲网站国产网址在线观看A级毛片高清免费网站不卡。

Structure feature:

1.   Series LK pumps are of vertical single stage and/or multistage centrifugal or     mixed flow with diffuser types.

2.   The following structure types are available for the pump:the discharge opening above and/or under the mounting foundation(Type Code named S and X respectively);the axial thrust force born by the pump and/or by the motor(Type Code named T and D);lubricating water from outside and/or from the pump itself.

3.   The intake sump is of wet pit and/or dry pit types.

Wet pit type:lower part of the pump inundated in the intake sump.

Dry pit type:the water enters into the pump,the suction bellmouth is connected with the inlet  pipe of the pump by means of elbow bend pipe of 90⁰.

4.   Rubber guide bearings and /or the Thordon guide bearings are available for  bearings of the pump.

5.   Generally when the nozzle diameter of the pump is under 1000mm , non pull-out type is adopted for the rotor and the discharge opening is above the mounting foundation(Type Code named ST). In this case the axial thrust force and the weight of the rotor are usually born by thrust bearings of the pump itself and  flexible connection is adopted between the pump and the motor.The thrust force and the weight of the rotor can also be born by the motor if required,or other structure types such as SD,XT,XD are available .Rotor pull-out type can also be adopted if required by clients.

Generally when the discharge diameter of the pump is above 1000mm, pull-out type is adopted for the rotor and the discharge opening is under the mounting foundation(Type Code named XD).In this case the axial thrust force and the weight of the rotor are usually born by thrust bearings of the motor and rigid connection is adopted between the pump

and the motor. The axial thrust force and the weight of the rotor can also be born by

the pump if required,or other structure types such as XT,SD,ST are available .Rotor non pull-out type can also be adopted if required by clients.  

6.   When the axial thrust force and the weight of the rotor are born by pump itself,the thrust bearing of the pump is lubricated with dilute oil and is equipped with a temperature detector Pt100 to detect bearing temperature and a pressure type thermometer to detect the temperature of lubricating oil.

7.   The antielectrochemical corrosion appliance is adopted for the part of the pump contacting the liquid to ensure the service life of the pump when seawater is pumped.

8.   The packing seal is adopted for the axial seal of the pump.

9.   The clearance between the impeller and the impeller chamber,i.e.the rotating component and the static component,can be easily adjusted on the pump mounting foundation.

LK型可抽式立式長軸濕坑泵産品主要零部件材質Materials Of Major Parts

注：根据用户具体使用要求A级毛片高清免费网站不卡，可另选其它适合材质一个人看的免费高清WWW视频。铸铁材质葉輪只适用于闭式葉輪国产网址在线观看。

Remarks:Other materials are  available at the request of clients.Cast iron is suitable only for closed type impeller.

LK型可抽式立式長軸濕坑泵型谱图

LK型立式長軸濕坑泵外形尺寸圖(基本型式XD)